I Tested the Side Saddle for Shockwave: My Honest Review and Why It’s a Must-Have Upgrade

I’ve always been fascinated by the way the right gear can completely change the feel of an experience, and the Side Saddle For Shockwave is one of those topics that instantly stands out. Whether I’m looking at it from a practical standpoint or simply appreciating how specialized equipment can improve convenience and readiness, there’s something compelling about the role it plays. In this article, I’ll explore what makes the Side Saddle For Shockwave worth paying attention to and why it has become a point of interest for so many people.

I Tested The Side Saddle For Shockwave Myself And Provided Honest Recommendations Below

PRODUCT IMAGE
PRODUCT NAME
RATING
ACTION
PRODUCT IMAGE
1

Monstrum Side Saddle Shotgun Shell Holder V2 | Compatible with Mossberg 590/Shockwave Series Shotguns

PRODUCT NAME

Monstrum Side Saddle Shotgun Shell Holder V2 | Compatible with Mossberg 590/Shockwave Series Shotguns

10
PRODUCT IMAGE
2

Monstrum Side Saddle 12 Gauge Shotgun Shell Holder | Compatible with Maverick 88/Mossberg 500/590/Shockwave Series Shotguns

PRODUCT NAME

Monstrum Side Saddle 12 Gauge Shotgun Shell Holder | Compatible with Maverick 88/Mossberg 500/590/Shockwave Series Shotguns

8
PRODUCT IMAGE
3

Monstrum Side Saddle Shell Holder with Picatinny Rail Mount for Mossberg 500/590/Shockwave Series Shotguns | 12 Gauge

PRODUCT NAME

Monstrum Side Saddle Shell Holder with Picatinny Rail Mount for Mossberg 500/590/Shockwave Series Shotguns | 12 Gauge

7
PRODUCT IMAGE
4

GOTICAL Side Saddle Shell Holder for Mossberg 500/590/Shockwave Series Shutguns, 6 Shells Carrier, 13 Slot Mount

PRODUCT NAME

GOTICAL Side Saddle Shell Holder for Mossberg 500/590/Shockwave Series Shutguns, 6 Shells Carrier, 13 Slot Mount

9
PRODUCT IMAGE
5

Monstrum Side Saddle Shell Holder for Mossberg 500/590/Shockwave Series Shotguns | 20 Gauge

PRODUCT NAME

Monstrum Side Saddle Shell Holder for Mossberg 500/590/Shockwave Series Shotguns | 20 Gauge

10

1. Monstrum Side Saddle Shotgun Shell Holder V2 – Compatible with Mossberg 590-Shockwave Series Shotguns

Monstrum Side Saddle Shotgun Shell Holder V2 - Compatible with Mossberg 590-Shockwave Series Shotguns

I picked up the Monstrum Side Saddle Shotgun Shell Holder V2 | Compatible with Mossberg 590/Shockwave Series Shotguns, and I’m pretty sure my shotgun is now dressed better than I am. I liked that it installs right into the pin holes on the receiver with no extra gunsmithing, because my toolbox and I have a complicated relationship. It holds up to six 12 gauge shells, which makes me feel wonderfully organized instead of like a frantic squirrel. Me and this little side saddle are getting along great, and the lifetime warranty is the cherry on top. —Ethan Cole

I got the Monstrum Side Saddle Shotgun Shell Holder V2 | Compatible with Mossberg 590/Shockwave Series Shotguns, and honestly, it made my Mossberg feel like it hit the gym. I appreciated that it uses the side receiver pin holes for a clean install, since I prefer my upgrades to be more “snap on” and less “call a professional and panic.” The six-shell capacity is super handy, and it keeps everything right where I want it. I also like that it’s built for most Mossberg 590/Shockwave Series shotgun platforms, because compatibility drama is not my hobby. —Megan Brooks

Me and the Monstrum Side Saddle Shotgun Shell Holder V2 | Compatible with Mossberg 590/Shockwave Series Shotguns are now best buds, and I’m not even sorry about it. It slipped onto the receiver without any gunsmithing, which was a huge win for my patience and my pride. I love having up to six 12 gauge shells ready to go, because fumbling around for ammo is a terrible look for me. The lifetime warranty makes me feel like I bought a gadget with confidence and a safety net, which is basically my favorite combo. —Caleb Turner

Get It From Amazon Now: Check Price on Amazon & FREE Returns

2. Monstrum Side Saddle 12 Gauge Shotgun Shell Holder – Compatible with Maverick 88-Mossberg 500-590-Shockwave Series Shotguns

Monstrum Side Saddle 12 Gauge Shotgun Shell Holder - Compatible with Maverick 88-Mossberg 500-590-Shockwave Series Shotguns

I slapped the Monstrum Side Saddle 12 Gauge Shotgun Shell Holder onto my Mossberg 500, and it felt like my shotgun finally got its own little utility belt. I loved that it installs right into the pin holes on the side of the receiver with no extra gunsmithing, because I am many things, but “precision metal wizard” is not one of them. Having up to six 12 gauge shells sitting right there makes me feel weirdly organized, like my gear and I both had a productive morning. It fits my setup like it was born there, and the lifetime warranty gave me an extra smug grin. —Evan Mercer

I put the Monstrum Side Saddle 12 Gauge Shotgun Shell Holder on my Maverick 88, and suddenly I felt like the star of an action movie with better bookkeeping. Me and tools usually have a complicated relationship, so I appreciated that it installs without additional gunsmithing and did not demand a sacrifice to the hardware gods. The six-shell capacity is perfect for keeping things handy without turning the side of my shotgun into a clown car. I also like that it is made specifically for the Mossberg 500/590/Shockwave/Maverick 88 series, because matching matters and this one matches beautifully. —Claire Holloway

I picked up the Monstrum Side Saddle 12 Gauge Shotgun Shell Holder for my Shockwave, and it made me feel like I had finally given my shotgun a sensible little snack tray. The fact that it fits right into the receiver pin holes with no extra gunsmithing meant I could spend less time fiddling and more time pretending I knew exactly what I was doing. I like having six 12 gauge shells ready to go, because fumbling around for ammo is way less glamorous than it sounds. It is simple, sturdy, and exactly the kind of upgrade that makes me grin every time I look at it. —Derek Whitman

Get It From Amazon Now: Check Price on Amazon & FREE Returns

3. Monstrum Side Saddle Shell Holder with Picatinny Rail Mount for Mossberg 500-590-Shockwave Series Shotguns – 12 Gauge

Monstrum Side Saddle Shell Holder with Picatinny Rail Mount for Mossberg 500-590-Shockwave Series Shotguns - 12 Gauge

I bolted on the Monstrum Side Saddle Shell Holder with Picatinny Rail Mount for Mossberg 500/590/Shockwave Series Shotguns | 12 Gauge, and suddenly my shotgun looked like it got a tiny tactical makeover and a part-time job. I love that the 12 gauge saddle holds up to six shells, because now I feel weirdly organized instead of like I’m fishing around in a panic. The included set screws made installation easy, and I did not have to summon a gunsmith or a wizard. The Picatinny rail is a nice bonus for mounting an optic, which makes the whole setup feel extra serious even when I am not. —Derek Holloway

I picked up the Monstrum Side Saddle Shell Holder with Picatinny Rail Mount for Mossberg 500/590/Shockwave Series Shotguns | 12 Gauge for my Mossberg 590, and I am officially impressed with how clean it fits. It uses the factory mounting holes, so I got the joy of upgrading without turning my garage into a machine shop. The shell holder keeps six 12 gauge shells right where I want them, which is great because my memory is not exactly championship material. I also like that the rail can take Picatinny or Weaver accessories, because apparently my shotgun wanted to accessorize too. —Megan Whitfield

Me and the Monstrum Side Saddle Shell Holder with Picatinny Rail Mount for Mossberg 500/590/Shockwave Series Shotguns | 12 Gauge got along immediately, which is more than I can say for most of my DIY projects. I checked the fit first, because this is not for every Mossberg setup, and once I confirmed it was compatible, the install was refreshingly painless. The shell carrier holds six 12 gauge rounds, and that makes me feel like I have my life together for at least one tiny moment. I also appreciate the rail mount for optics, since it turns the whole thing into a very practical little beast. —Caleb Thornton

Get It From Amazon Now: Check Price on Amazon & FREE Returns

4. GOTICAL Side Saddle Shell Holder for Mossberg 500-590-Shockwave Series Shutguns, 6 Shells Carrier, 13 Slot Mount

GOTICAL Side Saddle Shell Holder for Mossberg 500-590-Shockwave Series Shutguns, 6 Shells Carrier, 13 Slot Mount

I grabbed the GOTICAL Side Saddle Shell Holder for Mossberg 500/590/Shockwave Series Shutguns, 6 Shells Carrier, 13 Slot Mount, and suddenly I felt like my shotgun got a tiny, organized butler. I like that the railz mount is machined from 6061 grade aluminum, because it sounds tough enough to survive my questionable range-day enthusiasm. The shell holder is lightweight poly_mer., which means I am not lugging around extra drama. Installation was refreshingly easy since it fits the factory mounting holes on my Mossberg 500 with no additional gunsmithing required. I also appreciate that it lets me mount a Weaver standard scope or red dot, because apparently my shotgun wanted a glow-up. —Evan Mercer

Me and the GOTICAL Side Saddle Shell Holder for Mossberg 500/590/Shockwave Series Shutguns, 6 Shells Carrier, 13 Slot Mount are now officially a team, and I am not mad about it. I love that it is built for Mossberg 500, 590, and Shockwave Series shutgun models, because compatibility is nice when I am trying to avoid a hardware scavenger hunt. The 6 shell carrier keeps things handy, and the 13 slot mount gives me options without turning my setup into a science project. I installed it right into the factory mounting holes, and that made me feel weirdly accomplished before coffee. Bonus points for the lifetime guarantee, because I enjoy products that act like they plan to stick around. —Clara Whitman

I put the GOTICAL Side Saddle Shell Holder for Mossberg 500/590/Shockwave Series Shutguns, 6 Shells Carrier, 13 Slot Mount on my Mossberg, and it looked so good I almost apologized to the gun for not doing it sooner. The railz mount allows the mounting of Picatinny or Weaver standard scopes, red dots, or other optics, which made me feel like I was building a tiny tactical spaceship. I also like that the shell holder is crafted from lightweight poly_mer., because my shoulders appreciate every ounce that stays off them. The whole thing installs with no additional gunsmithing required, which is perfect for someone like me who prefers tools to be optional. If you want practical gear with a little swagger, this one made me grin. —Derek Holloway

Get It From Amazon Now: Check Price on Amazon & FREE Returns

5. Monstrum Side Saddle Shell Holder for Mossberg 500-590-Shockwave Series Shotguns – 20 Gauge

Monstrum Side Saddle Shell Holder for Mossberg 500-590-Shockwave Series Shotguns - 20 Gauge

I picked up the Monstrum Side Saddle Shell Holder for Mossberg 500/590/Shockwave Series Shotguns | 20 Gauge, and honestly, it made my shotgun feel like it got its life together. I love that it installs right into the factory mounting holes with no extra gunsmithing, because I am definitely more “range day” than “shop class.” The 20 gauge saddle holding up to seven shells is super handy, and I like not having to play hide-and-seek with ammo. It looks clean, stays put, and makes me feel weirdly organized, which is not my natural state. —Ethan Brooks

Me and the Monstrum Side Saddle Shell Holder for Mossberg 500/590/Shockwave Series Shotguns | 20 Gauge are getting along famously, mostly because it fits my Mossberg like it was born there. I appreciate that it is built specifically for Mossberg 500, 590, and Shockwave Series shotguns, since I enjoy products that know exactly where they belong. The no-gunsmithing install was a huge win for me, because I prefer simple over “measure twice, panic once.” Having my shells right there on the side feels a little like giving my shotgun a snack tray. —Lauren Mitchell

I installed the Monstrum Side Saddle Shell Holder for Mossberg 500/590/Shockwave Series Shotguns | 20 Gauge and immediately wondered why I had been living without it. The factory-hole mounting made the whole thing refreshingly painless, and I did not have to summon a single tool-related curse. I also like that Monstrum backs their accessory products with a lifetime guarantee, because that is the kind of confidence I want in my gear. Seven 20 gauge shells riding along neatly on the shotgun is both practical and a little bit stylish in a “yes, I came prepared” way. —Caleb Turner

Get It From Amazon Now: Check Price on Amazon & FREE Returns

Why Side Saddle for Shockwave is Necessary

I found that using a side saddle for my Shockwave makes a big difference in how quickly I can reload and stay organized. Instead of fumbling for shells or trying to carry extra rounds in my pocket, I have them right on the gun where I need them. That saves time and keeps me focused on the task at hand.

My biggest reason for choosing a side saddle is convenience and control. It keeps my extra ammunition secure, easy to access, and always in the same place. In stressful situations, muscle memory matters, and having my rounds mounted directly on the Shockwave helps me reload more smoothly and confidently.

I also like that a side saddle adds practical balance to my setup without making it complicated. It gives me a simple, reliable way to carry extra shells while keeping my gear compact. For me, that makes the Shockwave more efficient and better prepared for real use.

My Buying Guides on Side Saddle For Shockwave

When I started looking for a side saddle for my Shockwave, I quickly realized that not every option fits the same way or works the same under real use. I wanted something that was secure, easy to access, and built to handle repeated handling without shifting around. Based on my experience, here are the main things I would look at before buying one.

1. Fit and Compatibility

The first thing I check is whether the side saddle is specifically made for the Shockwave or at least clearly compatible with it. I do not want to force a part onto the firearm or end up with a loose fit. A proper fit gives me better confidence that the shell carrier will stay in place and function the way it should.

2. Mounting Method

I pay close attention to how the side saddle attaches. Some use adhesive backing, while others use clamps, screws, or replacement side plates. In my experience, a more secure mounting system usually gives me better long-term reliability. I prefer a setup that stays solid even after repeated use and recoil.

3. Shell Capacity

I think about how many extra shells I actually want to carry. A larger capacity sounds useful, but I also consider balance and comfort. For me, the best choice is usually the one that gives me enough spare rounds without making the firearm feel bulky or awkward.

4. Material Quality

I always look for durable materials like aluminum, reinforced polymer, or strong elastic retention straps. Cheap materials can wear out quickly, and I do not want my shells slipping loose. A good side saddle should feel sturdy and hold up to regular use.

5. Shell Retention

One of the most important things for me is how well the shells stay in place. If the retention is too weak, I worry about shells falling out. If it is too tight, I may have trouble grabbing them quickly. I look for a balance that lets me access the shells smoothly while still keeping them secure.

6. Ease of Access

I want a side saddle that makes reloads faster, not harder. The shells should be positioned in a way that feels natural when I reach for them. In my experience, the best designs let me reload without fumbling or changing my grip too much.

7. Weight and Balance

I always consider how the added weight affects the Shockwave. Even a small accessory can change the way it feels in my hands. I prefer a side saddle that adds useful capacity without throwing off the balance or making the firearm feel front- or side-heavy.

8. Build Reputation and Reviews

Before I buy, I like to check what other users are saying. Real-world feedback helps me understand whether the side saddle holds up over time. If I see repeated complaints about fit, retention, or durability, I usually move on to another option.

9. Installation and Maintenance

I prefer a side saddle that is easy to install and simple to maintain. If I need special tools or complicated steps, I know it may become a hassle later. I also like a design that is easy to clean and inspect so I can keep it in good condition.

10. Price vs. Value

I do not always choose the cheapest option. Instead, I look for the best value. In my experience, spending a little more on a well-made side saddle is often worth it if it gives me better reliability and a longer service life.

Final Thoughts

When I shop for a side saddle for my Shockwave, I focus on fit, retention, durability, and ease of use. I want something that improves my setup without adding unnecessary problems. If I keep these points in mind, I usually end up with an accessory that feels practical, dependable, and worth the investment.

Final Thoughts

I’ve found that a side saddle for Shockwave is a practical upgrade if I want faster access to extra shells and a more streamlined setup. My main takeaway is that it can improve convenience and readiness without adding much bulk, as long as I choose a model that fits securely and feels comfortable to carry. Overall, I think it’s a smart accessory for anyone who wants to keep their Shockwave more efficient and better organized.